- Aluminum pipe
- Aluminum wire
- Aluminievy round
- Tape, foil
- Aluminum sheet
- Aluminum corner
- Aluminium square
- Aluminum channel
- Aluminum hexagon
- AD1
- AK4, AK4-1
- АК5, АК5св
- AK6, АК6Т1
- AK7
- AK8
- AMG2
- АМГ3Н
- AMG5, AMG5P, АМГ5Н
- АМГ61
- АМГ6Н
- AMC
- V65
- V95
- ВД1АМ
АК5, АК5св
Our consultant will save your time!
Vitaliy
sales department
+38 (095) 209-60-73
CMH implements at reasonable prices from the manufacturer various rolling of wrought aluminium alloys brands AK-5 and АК5св. The provider ensures timely delivery of products to any place specified by the consumer.
Technical characteristics
Aluminium alloys brands AK-5 and АК5св belong to the alloys with a high percentage of copper and silicon. The alloys have good fluidity, providing after grinding with low surface roughness. The considered aluminium alloy are ideal for use in aviazionnoj technique, and the alloy AK-5св — for the production of welding wire used in the welding of aluminum under a layer of flux. Due to the low density of these alloys is able to provide a weight reduction of castings. The distinctive parameters of aluminum alloy AK-5 and АК5св is the increased strength, toughness, rigidity of the walls on the finished product and good heat transfer.
The chemical composition of the alloy of GOST 1583−93
Al | Fe | Si | Mn | Ni | Ti | Cu | Mg | Zn | Impurities |
basis | ≤1,3 | 4…6 | 0,2…0,8 | ≤0,5 | 0.05… 0.2 | 1.5… 3.5 | Of 0.2… 0.8 | ≤1.5 | ≤2,8 |
Physical characteristics
- Density, kg/m3 — 2630;
- Melting point, °C — 570 620…;
- Coefficient of thermal conductivity at room temperature, W/mgrad — 113;
- Coefficient of thermal expansion in the temperature range 20…1000 C, µm/deg — 21;
- Specific heat, kJ/kgrad to 0.82.
Mechanical characteristics
- The limit of temporary resistance, MPa — 118 206…(smaller values for aluminum brand AK-5св);
- Yield strength, MPa — 70…160 (smaller values for aluminum brand AK-5св);
- Relative tensile elongation, % — 0,5…3,2 (smaller values for aluminum brand AK-5св);
- The modulus of elasticity, GPA — 72;
- Hardness on the Brinell hardness, HB, max — 65…75.
Buy
Supplier KMZ offers to buy a sheet, tape, wire, welding wire, pipe, aluminium, AK-5, АК5св at economical price. Regular customers can take advantage of the discount discount. The provider ensures timely delivery of products to any email address. The price is the best in this segment of the rental.
Supply, price
Buy a sheet, tape, wire, welding wire, pipe grades AK-5, АК5св provider KMZ can at an affordable price. The price is formed based on the European standards of production. Buy aluminium tape, welding wire, sheet, pipe of any brand in stock at a reasonable price, you can wholesale or retail.