- Titanium pipe
- Titanium wire
- Titanium Circle
- Titanium Tape
- Titanium sheet
- Titanium casting
- Titanium forging
- Ribbon rings
- Titanium hardware
- Titanium hexagon bar
- Carbide - titanium electrodes
- Centrifugal titanium casting
Titanium pipe
Our consultant will save your time!
Vitaliy
sales department
+38 (095) 209-60-73
dignity
Titanium is resistance to heat, good resistance to vibration, long static (fatigue) loading, and temperature extremes. It is resistant to corrosion, impact, salt solutions, industrial condensate. It is lightweight and very durable material. Titanium alloys are attracted by the reliability, heat resistance, and high corrosion resistance. Pipe made of titanium are used in the most demanding production conditions with significant mechanical load. They have another advantage — on the inner walls, there are no significant deposits. Throughout the operation, these tubes maintain their original quality fully.
manufacturer
Apply hot or cold rolled. Titanium pipes can be both seamless and welded. Welded is made from strips or sheet. The surface of cold-rolled and hot-rolled tubes has been heat treated and have etched surface. Hot-rolled pipes prior to delivery are subjected to additional machining on the inner and outer diameter.
use
High resistance to aggressive environments the gas type (t. n. gas corrosion), on the background of adequate technology has defined the field of application of titanium in jet pipe technology and heat exchange equipment. They are used in medicine for the production of prostheses in sport — for easy and durable climbing equipment. These pipes are relevant in the petrochemical industry, shipbuilding, exploration, and they do an excellent job with many complex tasks that are excessive for other materials.
types of titanium tubes
Titanium tube BT — lightweight and durable, has a high corrosion resistance to the effects of chemical aggressive environments demanded by the oil and gas industry. Pipes brand VT1−0 produced hot-rolled and cold-rolled way, have a special resistance to aggressive environments, can withstand cryogenic temperatures. Due to the high resistivity and namagnichennosti, they are in demand electrical engineering and instrumentation. Industrial chemistry of important chemical inertness and corrosion resistance. These pipes are used in the exploration for underwater oil and gas production. Pipe grades have similar corrosion and heat resistance. They are used in industrial chemistry of the gas industry is almost as wide as the pipe in titanium W.
mechanical quality
| Grade titanium | Rupture strength (kgf/mm2) | Elongation in % |
VT1−0 |
40−54 |
15 |
VT1−00 |
30−44 |
21 |
PT-1M |
35−55 |
26 |
PT-7M |
45−65 |
25 |
CHEMICAL COMPOSITION | ||||||||||
| Mark | Ti | Al | Mn | Mo | V | Zr | Cr | Sn | Si | Fe |
| VT1−00 | Basis | -- | -- | -- | -- | -- | -- | -- | -- | -- |
| VT1−0 | « | -- | -- | -- | -- | -- | -- | -- | -- | -- |
| PT-1M | « | 0,2−0,7 | -- | -- | -- | -- | -- | -- | -- | -- |
| VT3−1 | « | Of 5.5−7 | -- | 2−3 | -- | -- | 0,8−2,3 | -- | 0,15−0,4 | 0,2−0,7 |
| PT-3V | « | 3,5−5 | -- | -- | 1,2−2,5 | -- | -- | -- | -- | -- |
| OT4 | « | 3,5−5 | 0,8−2 | -- | -- | -- | -- | -- | -- | -- |
| OT4−0 | « | 0,2−1,4 | 0,2−1,3 | -- | -- | -- | -- | -- | -- | -- |
| OT4−1 | « | 1−2,5 | 0,7−2 | -- | -- | -- | -- | -- | -- | -- |
| VT5 | « | 4,3−6,2 | -- | -- | -- | -- | -- | -- | -- | -- |
| VT5−1 | « | 4,3−6 | -- | -- | -- | -- | -- | 2−3 | -- | -- |
| VT6S | « | 5,3−6,8 | -- | -- | 3,5−5 | -- | -- | -- | -- | -- |
| PT-7M | « | 1,8−2,5 | -- | -- | -- | 2−3 | -- | -- | -- | -- |
| VT9 | « | The 5.8−7 | -- | |||||||