Our consultant will save your time!



sales department

+38 (095) 209-60-73


Complex alloyed brass stamps LS59 and Л59 refer to alloys treated under pressure. They have superior technological properties, cheaper and stronger than copper, available to any processing. Ductility, temperature resistance, corrosion resistance, chemical inertness, allowed these alloys to take a worthy place in the modern industry. They have high resistance to wet abrasion, temperature extremes, vibration. They are fireproof. Easy installation brass parts, aesthetic appearance, long service life and reasonable price make them popular in many areas. It is important that after recycling brass can be reused.


The chemical composition of the lead brands of brass LS59 normalized GOST 15627−2004. Alloy includes the following components: copper 57−60%, zinc 37 to 42,2%, lead — to 1.9%, Alloying additives make up less than 1%.

Percentage composition according to GOST 15627−2004

Alloy Bi Si P Sn Fe Sb Mn Pb Zn Cu
LS59 ≤0,003 ≤0,2 ≤0,02 ≤0.3 mm ≤0,5 ≤0,01 --- 0,8−1,9 35−42,2 57−61


Produced semi-finished products: rods extruded GOST 2060−2006, rod hard and soft GOST 31366−2008, pipes GOST 494−90, hard and soft wire GOST 1066−90, strip cold — and hot-rolled GOST 931−90, sheet, soft and hard GOST 2208−2007. Alloy LS59 in demand for the manufacture of forgings; fasteners fittings, bushings, gears.


Get acquainted with the range, specify main features, advantages, the use parameters products you can on our website. The company «_" represents an infinite range of non-ferrous metal. Carried out both wholesale and retail deliveries.

buy at best price

Consistently high quality brass semi-finished products of various sizes will help you implement any production problems. Reasonable prices and a wide range of brands and LS59 Л59 will make your purchase convenient and comfortable. Full compliance with the requirements of the normative documentation for products that will provide long-term trouble-free operation of the whole complex of the industrial equipment. In the absence of the range of products necessary parameters can be considered the manufacture of semi-finished products on the presented drawings.