Our consultant will save your time!



sales department

+38 (050) 369-66-30

The elastic properties of a precision material are quite important characteristics that ensure a reliable and long-term operation of such raw materials even with a significant change in temperature conditions. Therefore, the alloy 68НХВКТЮ with a regulated index of elasticity is quite popular in many branches of the industrial complex.


Most often, this material is used as raw material in the production of high-quality long products, from which in turn, elastic semi-finished products with high sensitivity are manufactured. This product can work perfectly in a fairly wide temperature range from minus one hundred and ninety six to five hundred degrees plus. Such features allow the use of varietal products labeled with 68NHVKTU in various climatic conditions without loss of performance. Due to the high heat conductivity, electrical resistance and many other useful qualities, precision materials of this type are used in many areas of modern industry. Radio engineering, automotive, electrical engineering, aviation and many other spheres can not do without accurate materials, in which there are no harmful additives and whose composition is regulated by regulatory documentation.


Chemical composition in percents
Si Cu C B Fe Nb Mn Ti P Al S Co Ni Ce Cr W V
Up to 0,4 To 0.07 Up to 0.05 Up to 0,003 Up to 1 Up to 0.2 Up to 0,4 2.7−3.2 To 0.015 1.3−1.8 Up to 0,01 5.5−6.7 55.4−63.5 Up to 0.05 18−20 9−10.5 Up to 0.2
physical characteristics
Name Units Symbol The numerical value
Elastic modulus MPa Ex10 -5 1.79
Measurement temperature ° C T 20
The index of linear temperature expansion (at t = 100 ° C) 1 / deg Ах10 6 8
Mechanical properties (at 20 ° C)
Name of the characteristic Numeric value
Short-term tensile strength, MPa (ss) 1375−1570

Magnetic characteristics

Coercive force (not more than), (A / m) Ns
Magnetic permeability (not more than), (MH / m) Umax
Specific losses (no more) at a frequency of 50 Hz and a magnetic induction of 1 T, (W / kg) P1,0 / 50
The magnetic induction T (at least), with a magnetic field strength of 100, in magnetic fields (A / m) B100

Weldability indexes

The alloy has limitations on weldability The welding process requires some preliminary preparation (warming the contacting surfaces to one hundred and one hundred and twenty degrees and subsequent heat treatment of the seam zone)
The alloy has no weld constraints No additional operations are required
Hard to weld material It is necessary to warm the contacting surfaces to two hundred or three hundred degrees, the subsequent annealing and heat treatment after the end of the welding process

Buy at a bargain price

The alloy 68NHVKTYU is quite popular due to its relatively low cost and high working qualities. On our site the widest assortment of products from such precision raw materials is presented, which is able to satisfy any needs of the buyer. The sizes of various semi-finished products are limited to standard series, however, at the request of the customer it is possible to manufacture products with unique sizes individually.