- NP-2, Nickel 200, Nickel 201
- Alloy 27KH
- 29KK, Kovar®, Nilo®
- Alloy 32NK
- 32KDN, ЄI630A
- Alloy 36KNM
- 36H Alloy
- 36NXTU, Elinvar
- Alloy 36НХТЮ5М
- Alloy 36НХТЮ8М
- Alloy 38KDD
- 40KHNM, EI995
- 40ХНЮ, ЭП793
- 42H Alloy
- Perminvar
- Alloy 42 НХТЮ
- Alloy 45NHT
- Alloy 45H
- Alloy 47HD
- Alloy 47HXR
- 49KF, 49K2F
- Alloy 50NP
- 50Н, ЭИ467
- Alloy 50НХС
- Alloy 52H
- Alloy 68NHVKTYU
- Alloy 79NM
- Alloy 80NM
- Alloy 80NHS
Alloy 47HXR
Our consultant will save your time!
Alexander
sales department
+38 (063) 073-44-92
The regulated index of linear expansion, in a fairly wide range of temperatures (from minus seventy to plus three hundred and thirty degrees Celsius) for such a precision material as the 47HXR alloy ranges from eight and a half to eleven units per degree. Due to such a feature, such raw materials are suitable for use in different climatic conditions, in the manufacture of highly accurate measuring instruments that do not respond to temperature fluctuations by changing the dimensions.
Properties
| Chemical composition as a percentage | ||||||||
| silicon | carbon | iron | manganese | phosphorus | sulfur | nickel | Boron | chromium |
| Up to 0,3 | Up to 0.05 | 45.2−49.5 | Up to 0,4 | Up to 0,015 | Up to 0,015 | 46−48 | Up to 0.02 | 4,5−6 |
| physical characteristics | ||||
| Name | Units | Symbol | The numerical value | |
| Elastic modulus | MPa | Ex10 -5 | 1.4 | |
| Measurement temperature | ° C | T | 20 | |
| Electrical resistance (specific) | Omxm | Rx10 9 | 900 | |
| Mechanical properties (at 20 ° C) | ||||
| Name of the characteristic | The numerical value of the parameter for the products | |||
| Short-term tensile strength, MPa (ss) | 450−550 | |||
| Relative elongation at break,% (d5) | 25 | |||
| Heat treatment | annealing | |||
Weldability indexes
| The alloy has limitations on weldability | The welding process requires some preliminary preparation (warming the contacting surfaces to one hundred and one hundred and twenty degrees and subsequent heat treatment of the seam zone) |
| The alloy has no weld constraints | No additional operations are required |
| Hard to weld material | It is necessary to warm the contacting surfaces to two hundred or three hundred degrees, the subsequent annealing and heat treatment after the end of the welding process |
BUY AT THE OPTIMUM PRICE
Our site offers a wide range of products from precision materials. The high quality of products and the absence of intermediaries determine the most favorable conditions for the acquisition of such material as the alloy 47HXR for solving any problems of modern industry. Delivery in a short time in almost any region of the country and compliance products regulatory documents have long won the love and trust of regular customers. Due to the relatively low cost and wide range and model range of semi-finished products of the brand 47НХР they enjoy the constant demand in all spheres of production.