Stainless steel round bar

Our consultant will save your time!



sales department

+38 (095) 209-60-73


The beginning of the twentieth century saw the advent of stainless steel. This durable, wear resistance, high corrosion resistance material, raised modern industry to a new level. Today stainless steel products are the most common thing. It can be seen everywhere: from the food industry produce heat-resistant tableware and Cutlery to construction, medicine, engineering. the defense industry. Stainless steel bar also known as stainless steel rod. Disc called products of a large diameter. They are used in the engineering industry for the production of solid workpieces and large parts.


• Construction of fencing,

• decor and furniture accessories

• details of valves,

• fasteners,

• parts of engines and machines

• technical and medical instruments,

• shafts, axles, rollers for bearings,

• household appliances,

• tableware,

• equipment for food and light industry.

And this is not a complete list


Stainless steel bar according to the method of production can be calibrated and hot rolled. In turn, the calibrated range is cold-drawn and cold-rolled. The steel grade used for the manufacture of the circle: 08KH18N10T, 12X18H10T-VD, 12X18H10T or Monel.


The circle marks 10X17H13M2T (GOST 2590−88, 5949−75) made of stainless non-magnetic austenitic steel.

The percentage composition of the alloy according to the 10X17H13M2T GOST 5632−72.

Mo C Si Cr Ni Ti Mn P S Fe
2−3 ≤0,1 ≤0,8 16−18 12−14 ≤0,7 ≤2 ≤0,035 ≤0,02 basis

Distinctive qualities:

• excellent weldability by all welding processes

• does not require pre-heating and heat treatment after welding

• durability in aggressive environments acetic and phosphoric acid

• high performance at t° to 600°C

• Increased resistance to corrosion in the environment with chloride ions, due to the molybdenum content (3%)

• Low resistance to corrosion microscale

Widely used in power engineering, shipbuilding, oil and gas, food, medical, pulp and paper industry.


Stainless steel bar from non-magnetic corrosion-resistant steel 12X18H10T has good workability and plasticity. The alloy retains its mechanical and corrosion properties at temperatures over 300 degrees Celsius, has a light weldability.

Percentage composition GOST 5632−72.

Alloy C Ti Cu Ni Cr Mn P S Si Fe
12KH18N10T ≤0,12 ≤0,8 ≤0.3 mm 9−10,5 17−19 ≤0,2 ≤0,035 ≤0,02 ≤0,8 basis

Details and designs from the circle 12X18H10T used in the processing industry, in the production of valves employed in permanent contact with chlorinated water or salt solutions in the chemical, light, paper, textile, pharmaceutical and food industries.


Stainless steel round of high-alloy corrosion-resistant steel 20H23N18 has a high resistance to heat and fire resistance: parts made from this metal, withstand temperatures of more than 1000−1100°C.

Percentage composition according to GOST 5632−72.

Alloy C Si Cr Ni Mn P S Fe
20H23N18 ≤0,2 ≤1 22−25 17−20 ≤2 ≤0,035 ≤0,02 basis


Stainless steel bar is supplied random lengths from 1.5 to 5 meters, with diameter from 5 to 270 mm. Supply large diameter (greater than 9 mm) is a stack of straight lines. A quality product must not contain on its surface scale, delamination, contamination, and cracking. Scratches, shells, traces of advance are not considered a defect.


Consistently high quality of stainless steel rod and a great selection of semi-finished products of various sizes will help you implement any production problems. Reasonable prices and a wide range of steel products, will make your purchase convenient and comfortable. Full compliance with the requirements of the normative documentation for products that will provide long-term trouble-free operation of the whole complex of the industrial equipment. In the absence of the range of products necessary parameters can be considered the manufacture of semi-finished products on the presented drawings.

Form of delivery

Diameter Thickness Width Long
Wire 0,1−16,0 mm     in the Bay
Round 10−250 mm     1 — 6 meters