Titanium sheet
Our consultant will save your time!
Alexander
sales department
+38 (063) 073-44-92
Dignity
The titanium sheet has good plasticity, it is easily susceptible to cold deformation, surpasses similar products by specific strength. The surface of the sheet at high temperature, interacting with atmospheric gases, is covered with a strong protective oxide-nitride film. Due to heat resistance, such sheet maintains the stability of the structure in a sufficiently wide temperature range up to cryogenic ones. Unique properties are due to its balanced structure and special processing technology. The titanium sheet can be well welded by electron beam, argon-arc and contact methods. High resistance to moisture, salt solutions, food acids against a background of sufficient plasticity determined the scope of this material.
Application of
Due to its high performance, compliance with the most stringent sanitary and hygienic requirements, the titanium sheet is widely used in medicine, light industry and food industry. It is indispensable in transport engineering, oil and gas and petrochemical industry, provides long-term reliable operation of the most important equipment. The BT grade sheet is used for equipment operating at t ° up to + 450 ° C. The brand VT6 has high specific strength and corrosion resistance, thermal strength and non-magnetic importance for instrument making. It is also used by aircraft for engine parts, chassis, fasteners, wing fragments, cladding. From the VT6 sheet, due to its durability in sea water, propellers and the shell skin are produced. Titanium sheet of grade OT is used in the Navy, aviation, industrial chemistry. The sheet of grade OT-4, doped with magnesium and aluminum withstands for 2000 h t ° + 350 ° C. Due to plasticity, it is easy to deform, Punching is done in a cold state.
production
| Thickness | Cutting | Unit. Measurements | Price. |
|---|---|---|---|
| Sheet VT1−0 | |||
| 1 mm | 800 x 2000 mm, 650 x 2000 mm, 1000 x 2000 mm | Kg | Contract. |
| 2 mm | 900 x 1800 mm, 900 x 1750 mm, 930 x 1900 mm, 950 x 1290 mm, 960 x 1910 mm | Kg | — «- |
| 1.5 mm | 1000 x 2000 mm | Kg | — «- |
| 3 mm | 420 x 1450 mm, 350 x 1200 mm | Kg | — «- |
| 3 mm | 1000 x 2000 mm, 930 x 2250 mm, 1000 x 2200 mm, 1000 x 2450 mm, 1030 x 2500 mm, 1000 x 2450 mm, 1030 x 2000 mm, 1030 x 2500 mm, 1030 x 2200 mm, 1050 x 2450 mm, 1050 x 2300 mm, 1070 x 2520 mm | Kg | — «- |
| 3 mm | 430 x 1350 mm | Kg | — «- |
| 4 mm | 1000 x 2000 mm | Kg | — «- |
| 4 mm | 450 x 1200 mm | Kg | — «- |
| 5 mm | 1000 x 2000 mm | Kg | — «- |
| 6 mm | 1000 x 2000 mm | Kg | — «- |
| Sheet VT20 | |||
| 2.5 mm | 600 x 2000 mm | Kg | — «- |
| Sheet OT4 | |||
| 0.8 mm | 600 x 2000 mm | Kg | — «- |
Titanium sheets VT1−0, VT1−00 up to 2 mm thick are rolled up to 2 m in length. With a thickness of up to 10.5 mm, the length can be up to 5 m. The technology provides annealing, ironing, straightening and trimming at right angles. The edge of the sheet should be without rough burrs, and the surface — without delaminations and cracks, defects that go beyond the limits specified by tolerances. Sheets of BT series with a thickness of 6 — 10.5 mm are produced without finishing the edges, taking into account the subsequent pattern. The percentage composition of the impurities is specified in GOST 19807−74, OST 1 90013−81. The sampling is normalized to GOST 24231−80 .
supply
It is stored in covered warehouses under certain temperature conditions, where there is adequate protection against various mechanical and other damages.
Buy at the best price
A wide range of titanium sheets is offered on the site of OOO «_" The high quality of the products and the absence of intermediaries determine the most profitable offers for the purchase of titanium rolled products for the solution of current production tasks. Delivery in the shortest time in any region of the country and abroad, compliance of regulatory products already Thanks to their high performance and a wide range of semi-finished products, titanium rolling has been very popular in many areas of production.