Brass car
You are interested in the characteristics of the brass rolling? Supplier KMZ offers to buy brass car at economical price. The provider ensures timely delivery of products at any address specified by the consumer.
Technical specification of brass
Brass is a binary alloy composed of copper and zinc, which is produced for millennia and is valued for its corrosion resistance, hardness and attractive appearance.
- Content: Copper and zinc
- Density: 8300…8700 kg / cm3
- Melting point of 900…940 °C.
The exact properties of various brass alloys depend on the composition, particularly the ratio copper/zinc. All brass are characterized by good machinability, ductility, malleability strength. Between the brass with high and low zinc content, there are differences, however, all brands of brass are considered malleable and ductile (with an increase in the percentage content of zinc ductility of brass is reduced). Because of the low melting point of brass with high content of zinc is also easy to mold processing.
Use. Heat
Brass has good conductivity. Alloy with lower zinc content can easily patsa and welded. The high copper content also allows the metal to form on its surface a protective oxide layer (patina), which protects from further corrosion, which is a valuable feature for details subjected to constant moisture.
Electrical engineering
Brass has good conductivity (conductivity can range from 23 to 44% of the conductivity of pure copper), it is also considered to be wear-resistant and intrinsically safe.
Plumbing
Brass is non-magnetic and has a low coefficient of friction on metal., tech. The brass, like copper a good bacteriostatic properties, it promotes its use for the manufacture of sanitary fittings
Use in the home
Due to the high acoustic characteristics of the brass used in the manufacture of strings for musical instruments.
Feature brass rolling
Brass car is manufactured in compliance with technical requirements GOST 2060−90. The standard applies to the drawn and extruded brass rods, round, square and hexagonal cross-sections used in various industries. Nominal number diameter (for square and hexagonal bars — the size of the inscribed circle) drawn brass rods of circular cross-section — from 3.0 to 50.0 mm. nominal number diameter (for square and hexagonal bars — the size of the inscribed circle) of extruded brass rods of circular cross-section from 10.0 to 160,0 mm.
A method of manufacturing of bars | Profile rod | Brand of brass |
Drawn Drawn Extruded |
Round, square, hexagonal, Round, square, hex | L 63, LS 59−1, LO 62−1, lzhs 58−1-1, LM 58−2, Limc 59−1-1 LS63−3 L 63, LO62−1, LS 59−1, 58−2 LM, Limc 59−1-1, CRAP 60−1-1, Lzhs 58−1-1 |
As material drawn bars made:
- from alloys of L 63, L 59−1 — soft, semi-solid and solid;
- from grades lzhs 58−1-1, LM 58−2, Limc 59−1-1 — semi-solid;
- of grade LS 63−3 — solid and semi-solid.
Buy
You are interested in the characteristics of the brass rolling? Supplier KMZ offers to buy brass car at economical price. The provider ensures timely delivery of products at any address specified by the consumer.
Supplier, price
Buy brass car provider KMZ can at an affordable price. The price is formed based on the European standards of production. Buy brass car at a reasonable price, you can wholesale or retail. Regular customers can take advantage of the discount system of discounts from the company KMZ.
Our consultant will save your time!
Vitaliy
sales department
+38 (095) 209-60-73