Processing and manufacturing of tool steel

Buy, supplier KMZ

To buy any brand of tool steel provider KMZ can at an affordable price. The price is formed based on the European standards of production. The supplier offers to buy tool steel at an affordable price wholesale or retail. KMZ supplier offers to any brand of tool steel under the order. The optimal price in this segment of services.

Carbon tool steel

Brand: U8, U10, 11, Y12, Y13 contain 0,75−0,9 carbon. This gives the alloy hardness, but increases fragility. Operating temperature does not exceed 200 °C.

Percentage composition according to GOST 1435−99

Alloy Fe C Cr Ni Cu Mn P S Si Impurities
U8 basis 0,75−0,84 ≤0,2 ≤0,25 ≤0,25 0,17−0,33 ≤0,03 ≤0,028 0,17−0,33 ≤0,15

Alloy tool steel

9KHS, 11KHF, 13X, HSG, X, V2 °F. Contain an additive of tungsten, vanadium, molybdenum. The percentage 9KHS (GOST 5950−2000)

Fe Ni C Cr Mo W V Cu Mn P S Si Ti
basis ≤0,4 0,85−0,95 ≤0,2 ≤0,2 ≤0,2 ≤0,15 ≤0.3 mm 0,3−0,6 ≤0,03 ≤0,03 1,2−1,6 ≤0,03

High speed tool steel

R6M5, R12F3, Р8М3К6С, Р8М3, Р8М5, P9, P18. Contain a higher percentage of tungsten, vanadium, molybdenum. Percentage composition of R6M5 (GOST 19265−73)

Fe Ni C Cr Mo V Cu Mn P S W Si Co
basis ≤0,6 0,82−0,9 3,8−4,4 4,8−5,3 Of 1.7−2.1 ≤0,25 0,2−0,5 ≤0,03 ≤0,03 5.5 to 6.5 0,2−0,5 ≤0,5

Stamps cold deformation

3Х2В8Ф, 5KHNV, 5KHNM, 4KH3VMF, 4KH5V2FS, 4KH2V5MF. Characterized by high hardness, high strength. Possess high viscosity and operating temperatures.

Stamps of hot deformation

3Х2В8Ф, 5KHNV, 5KHNM, 4KH3VMF, 4KH5V2FS, 4KH2V5MF. They do not lose their advantages when working high temperatures, have high thermal conductivity, the Design characteristics of 5KHNM at a temperature of 500°C: blower SB=900 MPa,

Treatment

Billets produced in the form of round or square hot-rolled, forged or cold drawn rods, bars, strips in annealed condition. Diameter bars in 6 — 180 mm, and a length of 2.5 — 5 m. For the manufacture of tools of small diameter are used cold drawn bars. Part of the workpieces produced for cutting and turning machines, cutters, presses, and powered hand saws and circular saws. The most productive method sections of billets is cutting on eccentric presses.

Supply, price

Are you interested in machining and manufacturing of tool steel? Supplier KMZ, offers to buy tool steel. at an affordable price in a optimally short period of time. The price matches the high quality of products.

Our consultant will save your time!

Igor

Igor

sales department

+7 (962) 383-76-36