Cutting and processing of molybdenum

Are you interested in cutting and processing of molybdenum? Supplier KMZ offers to buy molybdenum and molybdenum alloys at economical price. Supplier guaranteed timely delivery at any address specified by the consumer.

General information

The molybdenum obtained by recovery from the oxide, rather fragile, so his subsequent treatment requires special technologies. Method of vacuum-arc casting metal provides the highest uniformity and quality. This achieves high strength at elevated temperatures and facilitates its subsequent processing and welding.

Smelting and rolling

In the process of vacuum arc casting of 99.95% molybdenum powder, pressed, sintered, and melted (all under conditions of deep vacuum) to produce castings weighing up to one ton. Then the casting is further treated by extrusion followed by forging or rolling. Maximum toughness and ductility at low temperatures molybdenum hire provided only with a reduced content of carbon (less than 0.01%). Of molybdenum castings produced subsequently, forgings, bars, sheet, plate and foil.

Processing of molybdenum

Hot molybdenum plastic and allows to produce forgings of any shape with large degrees of deformation. Of the methods of pressure treatment are used in hot rolling, extrusion, forging, and thus can be obtained to rent any cross-section. When machining the initial workpiece should be thoroughly cleaned from surface contamination or oxides.

Long products

Hot-rolled rods are produced with diameters from 10 to 40 mm, and forged products (forged rods, cylinders, cubes, parallel tips and leaves) in diameter or rectangular size from 30…300 mm up to 1500 mm in length. After forging molybdenum workpiece is subjected to annealing to relieve internal stresses.

Cutting

Molybdenum is easy to work on machine tools. Cutting rental use friction saws, band saw machines and high-speed pulse scissors.

Buy

Are you interested in cutting and processing of molybdenum? Supplier KMZ offers to buy molybdenum rolled at economical price. Supplier guaranteed timely delivery at any address specified by the consumer.

Supplier, price

Buy rare and refractory metals from a vendor KMZ can at an affordable price. The price is formed based on the European standards of production. Buy molybdenum and its alloys and at a reasonable price, you can wholesale or retail. Regular customers can take advantage of the discount system of discounts from the company KMZ.

Our consultant will save your time!

Stanislas

Stanislas

sales department

+7 (905) 233-21-42