Our consultant will save your time!

Alexey

Alexey

sales department

+38 (093) 727-19-11

characteristic

The basis of the NP2 grade tape is a high purity material containing not less than 99.5% chemically pure Ni. Such a material, due to a minimum of impurities, has a large range of useful properties: high plasticity, corrosion resistance to most concentrated acids, alkalis and aggressive industrial environments, as well as high electrical resistance. Nickel forms, when in contact with air, a dense surface protective film that protects the material from oxidative damage. And the minimum content of impurities contributes to the increase of mechanical and physical parameters and increases the heat resistance of the strip of grade NP2 .

The percentage composition of NP2, GOST 492−2006

Ni C, Fe Mg Cu Si Mn Bi Zn S Si As, Cd, P, Pb, Sn
99.5 To 0.1 ≤0,1 ≤0,1 ≤0.15 ≤0,05 ≤0,002 ≤0.007 ≤0.005 ≤0.015 To 0,002

Most often the tape of the brand NP2 is used by the electrical and chemical industries. Manufacturing of heat resisting elements of resistance, nickel-plating of semi-finished products, production and transportation of chemicals — is not possible today without a tape of NP2 .

Main settings

Name of semi-finished product Normative documents Designation of the characteristic

Σ in

N / mm 2

Σ t

N / mm 2

Δ

(%)

Ψ

(%)

Cold-rolled strip (in annealed condition) TU 48−0815−80−92 430 25
Hot rolled ribbon TU 48−0815−84−92 372 25
Cold-deformed tape TU 14−3-1591−88 196 40
Recommended heat treatment Heating in the temperature range 620−700 ° C with an exposure of at least three minutes per millimeter of product thickness, but not less than half an hour. Cooling in the open air.

Dependence of mechanical properties on the operating temperature of the material

T exec.

(ºC)

Σ in

(N / mm 2)

Σ 0.2

N / mm 2

Δ

(%)

Tapes brand NP2 thickness of 8 mm (annealing at t ° 650 ° C)
20 430
100 392
200 392
300 392
400 314
500 265
Tapes hot-pressed with NP2 6 mm thick and cold rolled with a thickness of 1.8 mm (annealing at t ° 650 ° C)
100 416
300 366 251 44
500 263 237 33

Buy at the best price

The prices for the NP2 brand tape depends on the product parameters and additional delivery conditions. The ribbon of grade НП2 differs an optimum combination of advantages and comprehensible cost. A wide variety of tape parameters will allow any buyer to choose the product that will most fully satisfy his requests. High quality of manufacturing and full conformity of production to requirements of the state standard documentation and technical conditions for delivery — the basic principle of our company in work with clients. A convenient way of delivery in the shortest time is an additional plus in working with us.