X23S5T tape
Our consultant will save your time!
Nicholas
sales department
+38 (050) 369-66-30
Relevance
In connection with the development of energy and electrical engineering, the production of heat-resistant materials of a new generation has increased significantly. In fact, such a relatively cheap type of alloy is almost inferior in its basic properties to materials with a high nickel content, and costs several times cheaper, which reduces the cost of production and increases the economic feasibility of the enterprise.
Eurofehral
As a raw material for the manufacture of eurofury, a ferrous-based alloy doped with 23% chromium and 5% aluminum is used.
Fechral X23Y5T — 875 (W-KA1)
The percentage composition of X23YU5T is GOST 10994−74 .
Cе | C | Al | Ca | Ni | Cr | Mn | P | Ti | Si | S |
---|---|---|---|---|---|---|---|---|---|---|
≤0,1 | ≤0,05 | 5−5.8 | ≤0,1 | ≤0,6 | 22−24 | ≤0.3 | ≤0,03 | 0.2−0.5 | ≤0.5 | ≤0.015 |
The residue is iron, melting point t ° 1500 ° C. Other names are Kanthal A1, Alloy 875, Alchrome 875, Kanthal A1, megapyrus GS SY, eurofehral, Resistohm 145
Fechral X23Y5 — 837 (W-KAF)
The percentage composition of X23YU5T is GOST 10994−74 .
Cе | C | Al | Ca | Ni | Cr | Mn | P | Ti | Si | S |
---|---|---|---|---|---|---|---|---|---|---|
≤0,1 | ≤0,05 | 4.5−5.8 | ≤0,1 | ≤0,6 | 21−23.5 | ≤0,7 | ≤0,03 | ≤0.5 | ≤0,6 | ≤0.015 |
The remainder is iron, t ° melting1500 ° C Analogues: Kanthal AF, Aluchrom Y, Alloy 837, GS SY, eurofeek Resistohm Y, megapyr.
It should be noted that the main advantage of eurofish is due to the advantageous chemical composition, cheapness and ability to withstand high temperatures.
Physical qualities of fechrali X23SY5T | |
---|---|
Ud. Weight g / cm 3 | 7.21 |
Operating temperature t ° С | Up to 1250 ° С |
Melting point t ° C | 1500 ° С |
Annealing temperature t ° С | 870−1040 ° C |
Ud. Electric resistance Ohmmm 2 / m | 1.39 |
Hardness НВ x0.1 MPa | 200−250 |
The limit is short. Strength of the tape MPa | 765 |
Application
Eurofehral can be used both in machine building and in construction. Quite often such a semi-finished product is used in units that are involved in any high-temperature production. High resistance to heavy operating conditions and inertness to the influence of the majority of industrial aggressors, as well as a relatively low price allowed to significantly expand the application of this material in recent years in almost any field of technical activity.
Buy at the best price
The company «_" sells eurofahral at the best price from the manufacturer. The level of service and product quality are at the European level. Our site contains the most prompt information. Our managers are always glad to help with product selection. Replacing orders takes minimal time. .