Processing and manufacturing brass

You are interested in processing and manufacturing brass? Supplier KMZ offers to buy brass at economical price. The provider ensures timely delivery of products at any address specified by the consumer.

General information on brass

Of brass represent the alloys of copper where the main alloying element is zinc. The addition of zinc to the conventional copper-based alloy increases the performance of the basic mechanical characteristics of brass. In particular, increasing their limit strength and yield strength increase relative tensile elongation and toughness of the alloy. Almost all brass alloys with different technological processing, easily handled casting and machining, forged and pressed either hot or cold condition.

Classification

Classification of brass is done on the following parameters:

  • As the supply of cast or wrought marks;
  • Hardness: soft, semi-solid and solid;
  • According to the degree of pre — strain cold-worked (hardened) and nanoclean (soft);
  • Referring to the preceding heat treatment.

Brass containing less than 56.5% of zinc, and containing a higher percentage of lead are processed only by cutting. Swinoujscie brass alloys partially replace the zinc rolling of bronze, and Nickel silver — an alloy of copper and Nickel.

Processing brass, depending on composition

Structure of brass alloys determines their ductility and ability to reproduce complex shapes of finished products. For example, α-brass, the zinc content not exceeding 36% are distinguished by good deformability in a cold state, not hot. Brass alloys that contain from 36 to 45% zinc, belong to the β-brass, their processing is carried out only at elevated temperatures (700…850°C). Γ-brass, the zinc content exceeding 48%, are only processed on machine tools. In a separate group include tomaki — brass alloys in which copper is over 90%. Such brass is widely used in the manufacture of decorative items and jewelry.

Assortment

From wrought brass alloys to produce various types of rolled sections rod, wire, strip, etc Of them produce the products such as bushings, gaskets, sanitary fittings. Cast brass used in the manufacture of slide bearings, which work under conditions of constant friction. It is made also nuts are the adjusting screws and the rims of the worm wheels responsible.

Buy

You are interested in processing and manufacturing brass? Supplier KMZ offers to buy brass at economical price. The provider ensures timely delivery of products at any address specified by the consumer.

Supplier, price

Buy the brass from a vendor KMZ can at an affordable price. The price is formed based on the European standards of production. Buy brass car at a reasonable price, you can wholesale or retail. Regular customers can take advantage of the discount system of discounts from the company KMZ.

Our consultant will save your time!

Stanislas

Stanislas

sales department

+7 (905) 233-21-42