33NK ribbon, round, wire

An important technological value of materials of precision cannot be overestimated. Today they are the solid Foundation that ensures continuous development and improvement of the whole industrial complex. Because of the special requirements for the construction and the permanent control in the absence of harmful impurities in the finished product, and percentage compliance of each component of the alloy to the requirements of normative documentation, the result of the smelting process becomes receiving new-generation material with high parameters of working and performance.

Characteristics of the alloy 33NK

The alloy 33NK refers to a variety of materials with controlled coefficient of thermal expansion. This characteristic of the raw material varies from six to nine units per degree and remains constant for a wide temperature range from minus to plus seventy four seventy degrees Celsius. Also, this material has high value of melting temperature (to one thousand four hundred and fifty degrees). Because of their specific features this alloy is used in the connection of structural elements of ceramic, mica or glass. It should be noted that in the manufacture of new equipment, the material of this brand is not recommended, it is most commonly used in the process of repairs of existing equipment.

Properties

Chemical composition in percentage
silicon carbon iron manganese phosphorus sulfur Nickel cobalt
to 0.3 to 0.05 Exchanged them for 48.22−51 to 0.4 to 0.015 to 0.015 32,5−33,5 16,5−17,5
Physical characteristics
Name Units Symbol The numerical value
The modulus of elasticity MPa Ex10−5 1,42
Temperature measurements °C t 20
Density kg/m3 r 8200
The electrical resistance (specific) Omhm Rx109 420
Mechanical properties (at 20°C)
Name characteristics The numerical value of the parameter for the products in GOST 14080−78
Tape CR drawing
Short-term tensile strength, MPa (blower SB) 930

The magnetic characteristics

The coercive force (not more than), (A/m) NS
Magnetic permeability (not more) (MH/m) Umax
Specific losses (not more) at a frequency of 50 Hz and a magnetic induction of 1 T, (W/kg) P1,0/50
Magnetic induction T (not less), when magnetic field 100, a magnetic field (A/m) B100

Indicators of weldability

The alloy has limitations in terms of weldability The welding process requires some advance preparation (preheating contacting surfaces to one hundred or one hundred and twenty degrees, and subsequent heat treatment suture zone)
The welded alloy has no restrictions Not require additional surgery
Difficult weldable material The necessary heating of the contact surfaces up to a few hundred degrees, the subsequent annealing and heat treatment after welding process

Buy at best price

Huge selection of products made of various of precision materials, including alloy grade 33NK meets the needs of the most demanding customer. Convenient delivery and individual approach to each client will make a purchase from us as comfortable as possible, and compliance of semi-finished products to high quality standards will act as a guarantee of reliable operation of such products on the most challenging and critical areas of the industrial complex. A variety of shapes and geometric parameters presented here, 33NK will allow you to choose the appropriate option for every purpose and to realize all the engineering plans.

Our consultant will save your time!

Igor

Igor

sales department

+7 (962) 383-76-36