Production technology stainless steel square

General characteristics

Stainless square is produced from structural corrosion-resistant steel. Use of such steel grades as: 10H17N13M3T, 10H17N13M2T, 17H18N9, 12H13, 12KH18N9T, 12H18N9, 12H18N10T, 20X13, etc. In the numerical-letter acronym reflected the main components. For example, 12X18H10T. 10 means to 0.10% carbon ©, X18 — about 18% Cr. H10 means 10% Ni, T is about 1% Ti. The share of Nickel and chromium determines the corrosion resistance.

Percentage composition according to GOST 5632−72

Alloy C Si   Cu Ti Mn P S Cr Fe
12KH18N10T ≤0,12 ≤0,8 ≤0.3 mm ≤0,8 ≤2 ≤0,035 ≤0,02 17−19 basis

If chromium more than 17% in the aggressive oxidizing environment, the material will have different special corrosion resistance. Nickel in addition to anti-corrosion properties, said alloy impact resistance and ductility. Titan gives the square of the heat resistance and improve the wear resistance of the semi-finished product.

production technology

The disc is heated to a temperature of 1250 °C, then served on the blooming. If necessary, the blank is cut, At the blooming mill hot billet for square undergoes primary treatment. Horizontal and vertical rolls it alternately compresses. In one approach, the mill compresses the product to 12 cm To achieve the necessary parameters required 15 — 20 passes. After finishing rolling is carried out the calibration. It can be high, high, normal accuracy, accordingly it is marked by the letters A, B, C, Standard stainless square has a cross section of 20 cm in the case that the cross section of the product, more it is produced, indicating the special order.

BUY AT best PRICE

Reasonable price stainless steel square, wide size range and a large variety of used structural alloys will allow any buyer to choose the product that most fully meets all its individual needs. High quality workmanship and full compliance of products with the requirements of the state normative documents and technical conditions for the supply — the main criterion, which adheres to our company in working with clients. The exact chemical composition and adjusted manufacturing technology ensure reliable operation of equipment and reasonable prices and convenient delivery method is the additional benefit of working with us.

Our consultant will save your time!

Igor

Igor

sales department

+7 (962) 383-76-36