Cutting and processing of magnesium

Technical characteristics

Pure magnesium a very light metal, its density is about 1.7 g/cm3 at 20 °C, its Surface covered with the oxide film, which is destroyed at 623 °C, after which Mg is burned.

Description The value
Chemical symbol Mg
Atomic (molar) mass, g/mol 24,3
Oxidation +2
Density [g/cm3] 1,738
The melting temperature t°C 650°C
The heat of fusion kJ/mol 9,2
The thermal conductivity K [W/(m·K)] 158
Heat of evaporation kJ/mol 131,8

Cutting and processing of magnesium

This is one of the most high-tech of metals: Ductility of this metal to a large extent depend on the content of additional impurities (nitrogen, oxygen). It is easily bent, punched, and rolled. Cutting of magnesium is equipment with gas cooling. If the processing is carried out by cooling the cutting edge of the water there is a risk of flash upon contact of water with hot magnesium.

Supply, price

Are you interested in cutting, shaping, and other information about magnesium? Company KMZ offers to buy magnesium and its alloys at an affordable price in a optimally short period of time. The price matches the high quality of products. We invite you to partnership.

Buy, supplier

To by alloys of magnesium provider KMZ can at an affordable price. The price is formed based on the European standards of production. The provider offers any metals at an affordable price wholesale or retail. Supplier KMZ offers magnesium and any other metal under the order.

Our consultant will save your time!

Stanislas

Stanislas

sales department

+7 (905) 233-21-42