Alloys based on titanium, vanadium and tungsten

Titanium-tungsten alloy

This material belongs to the composite alloys due to the significant difference in melting point between titanum and tungsten. Used methods of powder metallurgy. The number of additional components, which alloyed titanium products depends on the scope of application of the products.

The percentage VT6 GOST 19807−91

Fe C Si V N Ti Al Zr O H Impurities
≤0.6 ≤0.1 ≤0.1 3.5 — 5.3 ≤0.05 86.45 — 90.9 5.3 — 6.8 ≤0.3 ≤0.2 ≤0.015 ≤0.3

Limit short-term strength of the rod, GOST 26492−85 = 835−1050 MPa. Limit short-term strength sheet annealed, GOST 22178−76 = 885 MPa.

Hardening

The strength properties of titanium alloys[ can be substantially increased by cold deformation. Hardening is achieved by cold deformation, especially when large degrees of deformation up to 40%, then cold deformation hardening has a negligible effect. Recrystallization leads to softening. When the end temperature of recrystallization, the degree of ezuprechnaya reaches 80%.

Supply, price

The provider offers certified products. In the technical documentation included data on chemical composition and set the percentage limits of the additives. Supplier KMZ, supplying an alloy based on titanium, vanadium, and tungsten at an affordable price in a optimally short period of time from warehouses in Russia and Ukraine. The price matches the high quality of products.

Buy, supplier KMZ

Buy alloy based on titanium, vanadium and tungsten from the supplier KMZ can at an affordable price. The price is formed based on the European standards of production. To buy a rental based on titanium, vanadium and tungsten at an affordable price, you can wholesale or retail. Regular customers can take advantage of the discount system of discounts.·We invite you to partnership.

Our consultant will save your time!

Stanislas

Stanislas

sales department

+7 (905) 233-21-42