Our consultant will save your time!

Alexander

Alexander

sales department

+38 (063) 073-44-92

CMH offers to buy at affordable prices from the manufacturer round, wire or pipe, which is made of alloy grade С95400. Supplier guaranteed timely shipment of products at any address specified by the consumer.

The composition and application of

Alloy brand С95400 is an aluminum bronze, with a high content of Nickel and iron. Aluminium in combination with iron and Nickel to C95500 acts as a component that improves the strength characteristics of the material. The alloy can be successfully subjected to heat treatment, as a result of which its mechanical properties increase.

Typical applications: automotive — welding plants; in the manufacture of fasteners products — nuts, and large screws; mechanical engineering — bushings, high strength clamps, gears, valves, bearings, clips, saddles and valves, chassis parts, worm gears, machine parts, pressure blocks for steel industry, hooks for pickling installations

heavily loaded worm gears, pump parts, a variety of accessories.

The alloy is also used in the Maritime business for the manufacture of covers marine equipment, as well as in parts of ships

Chemical composition of alloy that conforms to the technical requirements of ASTM B505, is as follows:

  • Iron — 3…5%;
  • Nickel up to 1.5%;
  • Aluminum — 10,0 11,5…%;
  • Manganese — not more than 0.5%.
  • Copper — the rest.

The standard allows that, along with the Nickel in the alloy composition can enter a quantity of cobalt (in the range of percentage of Nickel content). The total number of impurities can not be higher than 0.5%.

To buy at cost-effective prices from the producer circle, a wire or a tube made of alloy grade С95400, offers KMZ. Supplier guaranteed timely delivery of products to any destination set by the client.

Properties

Basic physical characteristics:

  • Density, kg/m3 — 7450;
  • Melting point, 0 C — 1027;
  • Coefficient of thermal conductivity at room temperature, W/mgrad — 58,7;
  • Coefficient of thermal expansion in the temperature range 20…3000 C, µm/deg — 15.5;
  • Specific heat, kJ/ggrad — 419;
  • The modulus of elasticity, GPA — 107.

Mechanical characteristics:

  • Limit strength. MPa — 75…90;
  • Yield strength, MPa — 30…45;
  • Relative tensile elongation, % of 12;
  • Brinell hardness number, HB, no more than 170.

Technological features material: temperature range of forging — 650…7500 C, the weldability is good, but the welding in the environment of carbon dioxide is not recommended machinability is satisfactory.

CMH implements at reasonable prices from the manufacturer round, wire or pipe produced from alloy grade С95400. Supplier ensures immediate shipment of products to any address set by the customer.