Our consultant will save your time!



sales department

+38 (063) 073-44-92


ХН35ВТ sheet, tape, foil is used by modern industry as high-quality raw materials, which has unique performance indicators. The chemical composition of the material is of decisive importance. A powerful nickel base with the addition of a balanced complex of alloying components is a reliable guarantee of the durable work of such material in the most difficult production conditions.


ХН35ВТ sheet, tape, foil are resistant to significant temperature changes in the working area and high resistance to corrosion. The operating temperature, recommended for the long-term and reliable operation of semi-finished products, can vary from nine hundred to one thousand degrees, with a moderate load during operation. When welding to obtain a quality weld, such structural elements require preheating to two hundred degrees and subsequent heat treatment.


Percentage of GOST 5632−72 .

Alloy C Ti Fe Ni Cr Mn P S Si W
ХН35ВТ ≤0.12 1.1−1.5 38.23−47.1 34−38 14−16 1−2 ≤0,03 ≤0,02 ≤0,6 2.8−3.5

When forging semi-finished products from alloy ХН35ВТ the temperature gradually decreases from the beginning to the end of the procedure from 1170 to 850 degrees, and then the finished products should be cooled in the open air. Currently, a huge range of flat products is produced from this material. The variety of geometric dimensions allows choosing the most suitable variant for solving a problem of any complexity.


Especially often XH35WT sheet, tape, foil are used in the machine building and oil industry, because the high resistance to corrosion damage and significant heat resistance of the material allows you to ensure efficient operation and a long period of maintenance-free operation in the most difficult industrial conditions. To prevent the formation of scale on semi-finished products from alloy ХН35ВТ it is not recommended to exceed the temperature limit of 850 ° C in the working area of the product.


Acceptable cost ХН35ВТ sheet, tapes, foil and a wide range of products will allow you to easily choose the option that will most fully satisfy the requests. High quality of production and full compliance with the requirements of state regulatory documentation and technical conditions for supply is the main criterion that our company adheres to in working with customers. Precisely adjusted chemical composition and wire manufacturing technology ensure high quality and reliability of the products, and the optimal price and convenient delivery method is an additional advantage in working with us.