Sheet, plate, strip, foil

dignity

The advantages of Nickel alloys include high resistance to corrosion in combination with ductility and excellent machinability has a significant resistance, allowing the use of products based on Nickel at high temperatures up to 950 °C, some higher than 1000 °C. Alloys based on Nickel, despite its relatively high cost, have a set of unique qualities that are guaranteed to outweigh the initial costs. Today, materials like alloy KHN75MBTJU-VD, deservedly gained popularity and constant demand in many sectors of modern industry.

COMPOSITION

The percentage KHN75MBTJU-VD GOST 5632−72

Ni	C	Mo	SG	Ti	Nb	Fe	Al	S	Si	R
68,6−77,6	≤0,1	1,8−2,3	19−22	0,35−0,75	0,9−1,3	≤3	0,35−0,75	≤0,012	≤0,8	≤0,02

Basic properties of circle stamps KHN75MBTJU-VD depend on its chemical composition and percentage of constituent elements. So Nickel has led to resistance of this material to the action of the majority of industrial corrosive environments, heat resistance, prevents the degradation by high temperature modes of operation.

use

The advantages of the alloy determined the scope of the circle KHN75MBTJU-VD. Is manufacturer of fasteners, parts, piping systems, rotor, springs, high-temperature parts of the combustion chambers of gas turbine engines, which are limited to a temperature of 950 °C. Another important quality of the alloy is its good weldability, in connection with which the circle stamps KHN75MBTJU-VD can be applied to the manufacture of welded structures of any complexity.

technological parameters

Weldability	The necessary operations
No restrictions on welding	For high-quality welding pre-training is not required
Alloys limited welded type	Qualitative welded connection, maybe get after preheating contacting surfaces to 100−120°C and the final heat treatment suture zone, after the completion of welding works
Type alloys difficult to weld	Before welding contact surface has warmed up to 200−300°C. After welding, to improve the characteristics of the suture zone of the prefabricated subjected to high temperature annealing.
Mechanical properties
Name characteristics	The symbol	Numeric value
		Rolled sheet according to GOST 24982−81
The limit of proportionality (flow rate for residual deformation type), MPa	sT	345−390
Short-term strength (limit value), MPa	blower SB	740
The rate of elongation at the terminal force, %	d5	35
Heat treatment	Annealing at temperatures from 1050 to 1090ºС

Physical properties

Feature	The numerical value of the parameter
Temperature measurements tºC,	900	800	700	600	500	400	300	200	100	20
The modulus of elasticity (E), MPa	1,69	2,1
The coefficient of linear expansion (ах106), 1/deg	15,88	15,18	15,11	14,59	14,22	14,2	13,42	13,08	12,28
Heat (I), W/(mgrad)	47,4	40,2	34,5	29,3	24	19,6	15,9	13	10,5

buy at best price

Company «_" implements the tape KHN75MBTJU-VD at a reasonable price from the manufacturer. The level of service and quality of products at the European level. Our website contains the most current information. Our managers are always happy to help in the choice of products. Implementation of orders takes minimal time. Wholesale buyers get a preferential discount.