Wire, circle, rod
Our consultant will save your time!
+38 (097) 882-77-91
High resistance Nickel chromium wire to corrosion became the basis of wide application in modern industry in metallurgy, motor industry, gas industry and other industries. Among the advantages of wire brand KHN75MBTJU-VD — not only high resistance to aggressive media, but also flexibility, excellent processability, heat resistance to enable its use at high temperatures up to 950 °C. the Alloys of Nickel, despite its relatively high cost, have a set of unique qualities that are guaranteed to outweigh the initial costs. Nickel forms on the surface of the protective oxide film that protects wire KHN75MBTJU-VD from the action of corrosive industrial environments ensures the reliability and heat resistance at high-temperature modes of operation.
The percentage KHN75MBTJU-VD GOST 5632−72
The scope of the wire KHN75MBTJU-VD is very wide. A manufacturer of fixtures, fittings piping systems, springs, high-temperature parts of the combustion chambers of gas turbine engines operating at t º 950 °C. Another important quality of wire KHN75MBTJU-VD is its good weldability, so it can be used for surfacing and welding of chromium-Nickel alloys.
|Feature||The numerical value of the parameter|
|Temperature measurements tºC,||900||800||700||600||500||400||300||200||100||20|
|The modulus of elasticity (E), MPa||1,69||2,1|
|The coefficient of linear expansion (ах106), 1/deg||15,88||15,18||15,11||14,59||14,22||14,2||13,42||13,08||12,28|
|Heat (I), W/(mgrad)||47,4||40,2||34,5||29,3||24||19,6||15,9||13||10,5|
|Weldability||The necessary operations|
|No restrictions on welding||For high-quality welding pre-training is not required|
|Alloys limited welded type||Qualitative welded connection, maybe get after preheating contacting surfaces to 100−120°C and the final heat treatment suture zone, after the completion of welding works|
|Type alloys difficult to weld||Before welding contact surface has warmed up to 200−300°C. After welding, to improve the characteristics of the suture zone of the prefabricated subjected to high temperature annealing.|
|Name characteristics||The symbol||Numeric value|
|Rolled sheet according to GOST 24982−81|
|The limit of proportionality (flow rate for residual deformation type), MPa||sT||345−390|
|Short-term strength (limit value), MPa||blower SB||740|
|The rate of elongation at the terminal force, %||d5||35|
|Heat treatment||Annealing at temperatures from 1050 to 1090ºС|
buy at best price
A diverse range of wire brand KHN75MBTJU-VD always available in stock, LLC «_". The price of Nickel-chromium wire presented on our website do not include additional cost and affordable way of placing order and choosing the most suitable shipping option will ensure maximum efficiency. A huge variety of products from chromium-Nickel alloys we will pick up the necessary material to solve any most complicated industrial tasks. Wholesale buyers are offered preferential discounts